FREE AUSTRALIA WIDE SHIPPING* on Front Runner Roof Rack Kits, excludes remote & island locations

Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 1560mm(L) - by Front Runner

2 sold in last 8 days
KRCA001TN
$1,569.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1560mm/61.4'' (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
$1,569.00

Payment Options

payment options
Online payments and cash on pick up available.

Free Shipping

Free shipping for all Front Runner Roof Rack Kits

Australia only, exclude remote or island destinations

Shipping

If you live in a remote area, contact our team via SMS chat to get a shipping quote.

Installation

Contact our team via the online chat to get a quote for installation of this product at our partner installers on the Gold Coast & Byron Bay.
Installation has an additional fee & is available at The Garage Miami QLD & Simno's Auto Byron Bay NSW.
customers are viewing this product

  • Description
  • Specifications
  • Fitting Instructions
  • Front Runner
  • Description
  • This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9" (W) x 1560mm/61.4" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.

    All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

    In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:

    • Slot base width min 20mm / max 25mm
    • Slot base height min 6.5mm / max 10mm
    • Slot opening width min 8.5mm / max 10.5mm
    • Slot opening height min 2mm / max 5mm


    **Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.

    All Front Runner Racks are backed by a Limited Lifetime Warranty*

  • Specifications
  • KRCA001TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 1560mm(L) - by Front Runner


    Consisting of:

    3 x FASS024 - Foot Set / 50mm-60mm - by Front Runner
    1 x RRSTA08 - Slimline II Tray - 1165mm(W) X 1560mm(L) - by Front Runner


    Material used:

    Black epoxy powder-coated T6 aluminium
    High strength steel

    Approximate Installed Weight 21kg (47lbs)

    The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

    To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.

    If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

    If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.


    Shipping Dimensions:

    Width 450mm (18")
    Length 1615mm (64")
    Height 140mm (6")


    Shipping Weight:

    Weight 25.0kg (55.0lbs)

  • Fitting Instructions
  • Front Runner
  • Travel. Dream. Design. Build. Test. Evolve. Repeat.

    Legend has it that Front Runner was conceived between a 1988 Land Cruiser 70 and a 1992 Mercedes G-Wagen in Botswana, around a campfire, near a majestic Baobab, amongst elephant tracks, by a handful of friends from South Africa with backgrounds in engineering, design, manufacturing and off-road racing. After suffering through numerous equipment failures on their expeditions around the world, they decided to take their shared passion for vehicle based adventure travel and dream up new, smart gear and build it stronger than… well, as they put it, “stronger than the elephants at the watering hole 1 klick over.”

     

    And just like that, before the moon gave way to the sun, we were born.

    With the gruelling African bush as a testing ground, we at Front Runner focused on a tough love approach to developing products. With both feet facing the future and little sentimentally for mediocre ideas of the past – common approaches to off-road vehicle product design were quickly jettisoned in favor of innovation, new materials, and superior manufacturing practices.

     

    Today our products have a well deserved reputation (if we don’t say so ourselves) for quality, intelligent design, and durability. Our manufacturing facility just outside of Johannesburg, South Africa features in house laser cutting, bending and powder coating. Our CAD designed products by a team of engineers and built by skilled craftsman in our ISO-9001 : 2015 Certified factory.

    Our roof racks, water tanks, tents, awnings, drawer systems and camping accessories are enjoyed, used and abused around the world by casual campers, the U.N., overlanders, NGOs, outdoor enthusiasts and extreme athletes.

    [time] ago, from [location]
    You have successfully subscribed!
    This email has been registered