Toyota Land Cruiser 78 Slimline II 3/4 Roof Rack Kit - by Front Runner
Payment Options
![payment options](https://cdn.shopify.com/s/files/1/0552/2744/9427/files/guarantee_safe_checkout_process.png?v=1681698144)
Free Shipping
Free shipping for all Front Runner Roof Rack Kits
Australia only, exclude remote or island destinations
Installation
- Description
- Specifications
- Fitting Instructions
- Front Runner
This 2166mm/85.3" long, 3/4 Slimline II cargo carrying roof rack kit for the Toyota Land Cruiser 78 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRTL018L - Toyota Land Cruiser 78 3/4 Slimline II Roof Rack Kit - by Front Runner
Consisting of::
1 x LASD105 - No 5 Leg Diagonal 190mm (Pair) - by Front Runner
3 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x RRSTJ11 - Slimline II Tray - 1425mm(W) X 2166mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.2kg (90.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
40.4kg (89.0lbs)
![](https://content.frontrunneroutfitters.com/collateral/pv/TEFTRDEwNUZJVFRJTkdfSU5TVFJVQ1RJT05FTkZfTEFTVU5JLnBkZg.png)
- Language: EN
- Filename: F_LASUNI.pdf
- Filesize: 1.76 M
![](https://content.frontrunneroutfitters.com/collateral/pv/TEFTUzEwNUZJVFRJTkdfSU5TVFJVQ1RJT05FTkZfTEFTVU5JLnBkZg.png)
- Language: EN
- Filename: F_LASUNI.pdf
- Filesize: 1.76 M
![](https://content.frontrunneroutfitters.com/collateral/pv/UlJTVEoxMUZJVFRJTkdfSU5TVFJVQ1RJT05FTkZfUlJTVFVOSS5wZGY.png)
- Language: EN
- Filename: F_RRSTUNI.pdf
- Filesize: 2.31 M
Travel. Dream. Design. Build. Test. Evolve. Repeat.
Legend has it that Front Runner was conceived between a 1988 Land Cruiser 70 and a 1992 Mercedes G-Wagen in Botswana, around a campfire, near a majestic Baobab, amongst elephant tracks, by a handful of friends from South Africa with backgrounds in engineering, design, manufacturing and off-road racing. After suffering through numerous equipment failures on their expeditions around the world, they decided to take their shared passion for vehicle based adventure travel and dream up new, smart gear and build it stronger than… well, as they put it, “stronger than the elephants at the watering hole 1 klick over.”
And just like that, before the moon gave way to the sun, we were born.
With the gruelling African bush as a testing ground, we at Front Runner focused on a tough love approach to developing products. With both feet facing the future and little sentimentally for mediocre ideas of the past – common approaches to off-road vehicle product design were quickly jettisoned in favor of innovation, new materials, and superior manufacturing practices.
Today our products have a well deserved reputation (if we don’t say so ourselves) for quality, intelligent design, and durability. Our manufacturing facility just outside of Johannesburg, South Africa features in house laser cutting, bending and powder coating. Our CAD designed products by a team of engineers and built by skilled craftsman in our ISO-9001 : 2015 Certified factory.
Our roof racks, water tanks, tents, awnings, drawer systems and camping accessories are enjoyed, used and abused around the world by casual campers, the U.N., overlanders, NGOs, outdoor enthusiasts and extreme athletes.