Roof Top Tent - by Front Runner

A 1.3M wide roof top tent that is 2.4M long when set up. The super-low 330mm profile reduces wind resistance while on the road and lowers the vehicle’s total height. The Front Runner Roof Top Tent is the lowest profile roof top tent on the market!​​

• Mounts to the top of your Front Runner Roof Rack for quick, convenient, and comfortable shelter wherever you roam.
• Sleeps 2+ comfortably.
• Opens in one smooth motion for an instant bedroom.
• Lighter than all the other comparable roof top sleeping solutions on the market today, weighing only 43kg.
• Tent body constructed of water-repellent, durable 260g poly-cotton ripstop fabric.
• Full-coverage rainfly constructed of waterproof, UV-resistant 400d polyester oxford fabric. Remove or install quickly as needed with handy side-release buckles.
• Durable base with aluminum frame, sheeting, and dense foam core provide a sturdy, insulated foundation.
• Comfortable high-density foam mattress (6cm / 2.25" thick) with washable moisture & mildew-resistant polyester oxford fabric cover.
• Skylight vent windows in roof can be unzipped for fresh air, sunlight, or starlight views or sealed to trap heat and seal out the elements.
• The side window privacy panels zip upwards to close, so that the size of the opening can be adjusted according to privacy needs or weather conditions.
• 2 hanging pockets provide plenty of storage for personal items (34cm x 22cm / 13.5" x 8.5").
• Durable, heavy-duty PVC coated 650g nylon tent cover protects your tent while stowed and in transit.
• Mounting tracks (included) can be mounted front-to-back or side-to-side depending on your needs.
• Universal mounting plates and all necessary hardware included.
• Upgrade for easier mounting and dismounting using our Quick Release Tent Mount Kit / 4 Piece.
  Add convenient shelter underneath with our Roof Top Tent Annex which slides easily into the channel of the tent base.
• Includes sliding aluminum ladder.
• Ladder Weight limit: 180kg/400Lbs.

NOTE: Should the tent install height be higher than 2 meters you will need a Tent Extension Ladder.
NOTE: Front Runner Tent Mounts: Tent Mount Kit / 4 Piece, Tent Mount Kit / 4 Piece / Tall or Quick Release Tent Mount Kit / 4 Piece are the advised mounting methods for this Tent.

Consists of:
1 x Tent
1 x Flysheet
1 x Mattress
1 x Tent Cover
1 x Sliding ladder
1 x Rod kit
1 x Mounting studs kit
1 x Roof Top Tent Cover

Materials used:
Tent Body: Water-repellant 260g 600d poly/cotton ripstop
Rainfly: Waterproof, UV resistant 400d polyester oxford
Mattress Cover: Washable polyester oxford fabric
Mattress Padding: 60mm (2.25") thick high-density PU foam 
Tent Cover: 650g heavy-duty PVC
Tent Base: Aluminum sheeting and side rails with foam core
Ladder: Aluminum

Tent Dimensions:
Closed (with cover and ladder):
1330mm (52.4") L x 1245mm (49") W x 330mm (13") H

Closed (without cover and ladder):
1295mm (51") L x 1220mm (48") W x 216mm (8.5") H

Open Dimensions:
Exterior with Rainfly:
3330mm (131") L x 2290mm (90") W x 1330mm (52.4")

Interior:
2438mm (96") L x 1295mm (51") W x 1168mm (46") H (A Peak)

Mattress Dimensions:
1990mm (78.4") L x 1210mm (47.6") W x 60mm (2.4") H

Weight:
43kg (93lbs)

Load Rating:
270kg (600lbs)

Fitting Instructions

Travel. Dream. Design. Build. Test. Evolve. Repeat.

Legend has it that Front Runner was conceived between a 1988 Land Cruiser 70 and a 1992 Mercedes G-Wagen in Botswana, around a campfire, near a majestic Baobab, amongst elephant tracks, by a handful of friends from South Africa with backgrounds in engineering, design, manufacturing and off-road racing. After suffering through numerous equipment failures on their expeditions around the world, they decided to take their shared passion for vehicle based adventure travel and dream up new, smart gear and build it stronger than… well, as they put it, “stronger than the elephants at the watering hole 1 klick over.”

And just like that, before the moon gave way to the sun, we were born.

With the gruelling African bush as a testing ground, we at Front Runner focused on a tough love approach to developing products. With both feet facing the future and little sentimentally for mediocre ideas of the past – common approaches to off-road vehicle product design were quickly jettisoned in favor of innovation, new materials, and superior manufacturing practices.

Today our products have a well deserved reputation (if we don’t say so ourselves) for quality, intelligent design, and durability. Our manufacturing facility just outside of Johannesburg, South Africa features in house laser cutting, bending and powder coating. Our CAD designed products by a team of engineers and built by skilled craftsman in our ISO-9001 : 2015 Certified factory.

Our roof racks, water tanks, tents, awnings, drawer systems and camping accessories are enjoyed, used and abused around the world by casual campers, the U.N., overlanders, NGOs, outdoor enthusiasts and extreme athletes.