Level 2 LED Headlight Adaptor for Ford Ranger/Everest Next Gen

Next-Gen Ford Ranger & Everest Level 2 High Beam Adapter

Enhance your driving visibility with the Level 2 High Beam Adapter, purpose-built for the Next-Gen Ford Ranger and Everest. Designed for vehicles with LED reflector headlights, this adapter makes it simple to connect auxiliary lights to your high beam circuit — all while staying fully ADR compliant.

Why Choose This Adapter?

• Quick, No-Fuss Install – Plugs straight into the high beam signal point in the footwell. No cutting, splicing, or complex wiring required.

• ADR Approved – Auxiliary lights only activate with your high beams, keeping you road-legal under Australian Design Rules.

• Perfect Fit – Custom-engineered for Level 2 Next-Gen Ranger and Everest models to ensure seamless integration.

To suit:

-Next Gen Ranger XLT, Sport, Wildtrak & Platinum
-Next Gen Everest Ambiente, Trend, Sport & Platinum.

1 x ALTIQ Ford Ranger / Everest Next Gen (Level 2 LED Headlights) Piggy Back Adapter
1 x Fast Fit Single Wiring Harness - Direct Install with a fully configured harness. Battery Terminals, Fuse, Relay, In Cabin Isolation Switch

High Beam Signal in 6 Easy Steps – No Guesswork Needed

1. Run the exposed end of your ALTIQ™ Piggy Back Adapter through a suitable passenger-side firewall grommet.

2. Remove the passenger footwell kick panel to access the internal wiring loom.

3. Locate the clearly labelled “HIGH BEAM SIGNAL” wire just behind the panel.

4. Connect the red wire from your adapter to the high beam signal wire.

5. Connect the black ring terminal to a solid ground point behind the kick panel or nearby chassis bolt.

6. Plug your ALTIQ Fast Fit Harness into the T-Connector, and you're good to go.