Ford F150 Super Crew (2018-2020) Slimsport Roof Rack Kit / Lightbar ready - by Front Runner

• This low-profile flat deck Slimsport rack has a load carrying area of 1475mm (58") x 1405mm (55.3").
• The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
• The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
• Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small – by Front Runner for most Front Runner side mount accessories (sold separately).
• Included in the Ford SuperCrew (2018-2020) Slimsport is a 40" cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
• Fitment guide and all mounting hardware included.
• Does not work on models without a sunroof.
• Note: Drilling required for installation.

All Front Runner Racks are backed by a Limited Lifetime Warranty*

Note: For models with a front antenna, the fin or puck antenna outside edge must be 10" from the inside edge of the roof ditch. Please contact our help center if you are unsure. 
Note: Under Rack Tables are not compatible with the Slimsport rack kit range

KSFF002T - Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit / Lightbar ready - by Front Runner

Consisting of:
1x KSFF001 - Ford F-150 Super Crew (18-Curr) SlimSport Roof Rack
1x RRAC194 - Ford F-150 SCrew SRack 40"LightBar Wind Fairing

Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel

Approximate Installed Weight: 36.79kg (81.11lbs)

The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.

Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 210mm (8")

Shipping Weight:
Weight: 38kg (84lbs)

https://content.frontrunneroutfitters.com/collateral/doc/F_RRAC194.pdf

Travel. Dream. Design. Build. Test. Evolve. Repeat.

Legend has it that Front Runner was conceived between a 1988 Land Cruiser 70 and a 1992 Mercedes G-Wagen in Botswana, around a campfire, near a majestic Baobab, amongst elephant tracks, by a handful of friends from South Africa with backgrounds in engineering, design, manufacturing and off-road racing. After suffering through numerous equipment failures on their expeditions around the world, they decided to take their shared passion for vehicle based adventure travel and dream up new, smart gear and build it stronger than… well, as they put it, “stronger than the elephants at the watering hole 1 klick over.”

And just like that, before the moon gave way to the sun, we were born.

With the gruelling African bush as a testing ground, we at Front Runner focused on a tough love approach to developing products. With both feet facing the future and little sentimentally for mediocre ideas of the past – common approaches to off-road vehicle product design were quickly jettisoned in favor of innovation, new materials, and superior manufacturing practices.

Today our products have a well deserved reputation (if we don’t say so ourselves) for quality, intelligent design, and durability. Our manufacturing facility just outside of Johannesburg, South Africa features in house laser cutting, bending and powder coating. Our CAD designed products by a team of engineers and built by skilled craftsman in our ISO-9001 : 2015 Certified factory.

Our roof racks, water tanks, tents, awnings, drawer systems and camping accessories are enjoyed, used and abused around the world by casual campers, the U.N., overlanders, NGOs, outdoor enthusiasts and extreme athletes.