Chevrolet Silverado Crew Cab / Short Load Bed (2007-Current) Double Load Bar Kit - by Front Runner

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab / Short Load Bed. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.

Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.

The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.

KRCS004 - Chevrolet Silverado Crew Cab / Short Load Bed (2007 - Current) Double Load Bar Kit - by Front Runner Consisting of:

2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner

1 x LBSK018 - Roof Load Bar Pair 1575mm(W) - by Front Runner

1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner

Material Used:Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight: 11.4kg (25.2lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. 

https://content.frontrunneroutfitters.com/collateral/doc/F_TRBU002.pdf

Depth 310 Length 1685 Width 125mm

Shipping Dimensions:Width: 1685mm (66.0'')Length: 125mm (5.0'')Height: 310mm (12.0'') Shipping Weight:11.0kg (24.0lbs)

FREIGHT COSTS CAN BE CALCULATED IN THE CART OR CHECKOUT

* Oversize, heavy or bulky items are excluded from free freight. Costs will vary depending on delivery location.  

#excludes remote or island locations.  Some products are not available for delivery to NT, WA or TAS.

USA & New Zealand Freight Available

Please request a personalised quote from the product page using the CLICK HERE TO GET A PERSONALISED QUOTE button and include your delivery address in the notes section.

Wheels & Tyres

Wheel & tyre freight charges vary depending on the quantity purchased.  The online freight calculator at checkout will provide an accurate price, dependent upon the total weight of the goods purchased.  Minimum freight is $20 for 1 wheel or tyre. If your postcode does not render a delivered price in the cart/checkout please email or contact our team via online chat for a personalised quote.

Travel. Dream. Design. Build. Test. Evolve. Repeat.

Legend has it that Front Runner was conceived between a 1988 Land Cruiser 70 and a 1992 Mercedes G-Wagen in Botswana, around a campfire, near a majestic Baobab, amongst elephant tracks, by a handful of friends from South Africa with backgrounds in engineering, design, manufacturing and off-road racing. After suffering through numerous equipment failures on their expeditions around the world, they decided to take their shared passion for vehicle based adventure travel and dream up new, smart gear and build it stronger than… well, as they put it, “stronger than the elephants at the watering hole 1 klick over.”

And just like that, before the moon gave way to the sun, we were born.

With the gruelling African bush as a testing ground, we at Front Runner focused on a tough love approach to developing products. With both feet facing the future and little sentimentally for mediocre ideas of the past – common approaches to off-road vehicle product design were quickly jettisoned in favor of innovation, new materials, and superior manufacturing practices.

Today our products have a well deserved reputation (if we don’t say so ourselves) for quality, intelligent design, and durability. Our manufacturing facility just outside of Johannesburg, South Africa features in house laser cutting, bending and powder coating. Our CAD designed products by a team of engineers and built by skilled craftsman in our ISO-9001 : 2015 Certified factory.

Our roof racks, water tanks, tents, awnings, drawer systems and camping accessories are enjoyed, used and abused around the world by casual campers, the U.N., overlanders, NGOs, outdoor enthusiasts and extreme athletes.